F-15DJ duo
1February 3, 2017large gaps between the parts
2February 3, 2017added some thick CA and sanded smooth
3February 3, 2017added some paint for checking
4February 3, 2017after sanding, time for restoring some lines
5February 3, 2017bangseats in their basecolors
6February 3, 2017tubs too
7February 8, 2017instrument panels made with black paper
8February 8, 2017instrument panels made with black paper
9February 8, 2017seems sloppy, but this is approx. real size
10February 8, 2017seats got their belts
11February 9, 2017Cockpit finished
12February 9, 2017Cockpit finished
13February 10, 2017Thinning the inlets
14February 10, 2017Thinning the inlets
15February 10, 2017basic engines
16February 10, 2017actuator rods added
17February 10, 2017the most backwards one fell, while searching i put my chair on it... hope i can save it
18February 20, 2017Received some info that the bulged doors weren't mounted on these birds, as was the gun clip fairing, so I removed these and rescribed the detail
19February 20, 2017also the sensor at the end had to be removed, so I sanded these carefully in a point...
20February 20, 2017Job done, on to the cockpit...
21March 6, 2017seatbelts added to the bangseats
22March 6, 2017first cockpit ready
23March 6, 2017second too, 1 belt missing... darn..
24March 6, 2017canopy's taped, almost ready for primer
25March 7, 2017stabilisers (??) remade so that they are all equally large
26March 10, 2017primer on
27March 10, 2017the AAM-3 missile
28March 10, 2017body in copperwire
29March 10, 2017Fins drawn and printed to scale
30March 10, 2017At first I've glued these to a styrene sheet of 0.25mm, but it was to thick, so I applied some thine superglue to the printed paper and cut the fins out like this
31March 10, 2017My first AAM-3 in 1/144
32March 29, 2017Primer + dark grey
33March 29, 2017Some poster buddy
34March 29, 2017Added some light grey, result is a bit to subtle
35March 31, 2017Back to the base
36March 31, 2017Some prittbuddy buddy
37March 31, 2017More contrast
38March 31, 2017Unpacking
39March 31, 2017Unpacking
40March 31, 2017Unpacking
41March 31, 2017Unpacking
42April 5, 2017sprayed a mist coat over the darker camo.. left: after, right: before
43April 5, 2017sprayed a mist coat over the darker camo.. left: after, right: before
44April 5, 2017both done
45April 5, 2017engines in basecolors
46April 10, 2017decals that don't have a grey border are placed... Now on to sealing, tape and rest of camo..
47April 12, 2017on with the tape... hope it works...
48April 14, 20172h of taping, not even halfway...
49April 27, 2017
50May 4, 2017finally on to paint... wish me luck...
51May 4, 2017finally on to paint... wish me luck...
52May 4, 2017finally on to paint... wish me luck...
53May 4, 2017finally on to paint... wish me luck...
54May 7, 2017
55May 7, 2017
56May 10, 2017third color: White
57May 10, 2017more masking
58May 10, 2017more masking
59May 10, 2017more masking
60May 10, 2017more masking
61May 10, 2017The white acted funny here, wame out a lot thinner then before
62May 10, 2017last color: tyre black
63May 10, 2017striptease
64May 10, 2017striptease
65May 10, 2017fully stripped above...
66May 10, 2017fully stripped above...
Yorumlar
6 May 2025, 02:43 -
