Honda Magna 50Fifty (Tamiya 1:6)
1May 23, 2022
2May 23, 2022
3May 23, 2022
4May 23, 2022
5May 24, 2022Removing of the Chrome with the help of oven spray
6May 24, 2022Parts without the Aluminium Layer
7May 24, 2022Parts without the Chrome Layer
8May 25, 2022Glueing the Engine
9May 25, 2022I filles some bigger gaps and offset with Green stuff. Unfortuanetly that stuffs doesn't hold that good on the surface
10May 25, 2022Filled some gaps at the carburator with green stuff
11May 25, 2022I tend to jump some steps ahead in the instructions. I do this to minimize the work with the Airbrush. I try to combine as much parts as possible so i didn't have to switch the color in the Airbrush as much as often if i would stricly follow the instructions.
12May 30, 2022
13May 30, 2022Some Parts already sanded and prepared for the primer coat
14May 30, 2022Primer Coat on some Parts. I use vallejo Primer. Black Gloss for Gloss aluminium and Chrome, Black for Flat Alumnium and Metal parts, Grey for Black and dark colors and light grey for light color.
15May 30, 2022The Engine is ready for the color coat
16June 8, 2022
17June 8, 2022
18June 8, 2022
19June 10, 2022selfmade bowden cable and carburator overflow.
20June 25, 2022The bike was aviable in 3 different colors. Black, Max Silver metallica and pearl shining yellow.
In the instruction stated that you should use normal yellow. After priming the parts I used gunze Yellow. To get the pearl effect i used a thin layer of Createx wicked pearl Yellow.
21June 25, 2022
22July 7, 2022Parts with gloss black prime for chrome paint
23July 7, 2022Parts with gloss black prime for chrome paint
24July 7, 2022The most chrome Parts got there paint
25July 7, 2022The most chrome Parts got there paint
26July 22, 2022The most chrome parts are finished. Used Vallejo Metal Varnish for the Last Layer
27July 22, 2022Now Painting the Aluminium parts. Some Details will be paint later
28July 22, 2022
29August 5, 2022
30August 5, 2022
31August 5, 2022
32August 5, 2022
33August 5, 2022
34August 11, 2022The kit doesn't come with Air Valves. So I have to Buld my own. Used brass pipe and Microscale Kristal Clear.
35August 11, 2022Gluing the Frame
36August 11, 2022Rear Wheel
37August 11, 2022Rear Weehl almost finished. Only some washing and oiling is missing. You can see the selfmade Air Valve
38August 13, 2022Battery almost finished
39August 13, 2022Front wheel. The Air Valve is self-made. I used the same method as at the rear wheel
40August 13, 2022Rear Fender and Wheel assembled
41August 13, 2022
42August 13, 2022Fork and Front wheel assembled
43August 13, 2022It begins to look like a motorcycle
44August 27, 2022
45September 2, 2022Had some Problems with the handlebar. I tried to glue the lever with super glue. The Metal Varnish react with it. I just stripped the paint and did the painting a second time.
46September 2, 2022Almost finished. Only 1 - 2 Layer clear coat are missing
47September 2, 2022
48September 2, 2022
49September 2, 2022
50September 6, 2022
51September 6, 2022
52September 6, 2022
53September 6, 2022
54September 6, 2022
55September 6, 2022
56September 6, 2022
57September 6, 2022
58September 6, 2022
59September 6, 2022Finished
Comentários
17 May 2025, 23:19 -
Album info
It's a Special Kit for me. I'm driving the big brother a Honda VF 750C Magna. Unfortunatly there is no kit for this Bike. I stumbled upon this smaller version of it a just have to build it. I did take some extra time to build it. Don't want to rush and ruin it.
I'm really happy with the result. I would build it a second time. Just to get a little bit crazy with the painting.
