Fouga magister Kinetic
1February 12, 2016First blood... very fiddly and unclear construction, you almost need to position everything at once and the apply the glue...
2February 24, 2016interior parts BAF version in base-color
3February 24, 2016interior parts BAF version in base-color
4February 24, 2016interior parts BAF version in base-color
5February 24, 2016interior parts IDF version in base-color
6February 24, 2016interior parts IDF version in base-color
7February 24, 2016interior parts IDF version in base-color
8February 24, 2016front landing gear in base color
9February 24, 2016nose parts in base color
10February 24, 2016nose parts in base color
11February 25, 2016no decals for instrument panels provided, so I scraped them in with a needle. largest diameter of dial: 1.2mm...
12May 24, 2016a lot of filling and sanding on the body to remove the seams
13May 24, 2016a lot of filling and sanding on the body to remove the seams
14May 24, 2016cockpit
15May 24, 2016front cockpit
16May 24, 2016rear cockpit
17May 24, 2016almost ready for first paint
18May 30, 2016wings attached, rear closed canopy too... fit is ... as usual, with some remarks
19May 30, 2016wings attached, rear closed canopy too... fit is ... as usual, with some remarks
20May 30, 2016wings attached, rear closed canopy too... fit is ... as usual, with some remarks
21May 30, 2016piece that fits the opening behind the canopy, needed to add some material to sit flush....
22May 30, 2016opening up the cooling louvres...
23June 1, 2016added PE for mechanism control surfaces, fiddly but surprisingly sturdy when mounted
24June 1, 2016radius of cover and fuselage is different.... more filling and sanding... sigh
25June 1, 2016all scoop are separate... and thick... how to sand a part of 1.5x1.5x1mm to 0.5mm? due to how it is attached to the sprue no possibillity to do it before separating it from the sprue
26June 1, 2016wheelbay in basecolour
27June 2, 2016when one indicated control surface points upwards, the other should point down?
28June 7, 2016removed the airscoops and sanded them down a bit, gap between cover and hull filled
29June 7, 2016added the flaps and ailerons. For the ailerons you have the option to mount them in neutral or both down. so I changed 1 to move up, also the trim tab has changed, because it seems to move in opposite direction
30June 7, 2016
31June 7, 2016removed the airscoops and sanded them down a bit
32June 7, 2016only a mayor gap at the front shield needs to be filled
33June 7, 2016only a mayor gap at the front shield needs to be filled
34June 7, 20162 small pitots added. Only a mayor gap at the front shield needs to be filled
35June 10, 2016all black, no not the rugby team 😉
36June 10, 2016
37June 10, 2016some fine sanding necessary here, but overall it looks fine
38June 11, 2016Dayglow Orange added...
39June 11, 2016Dayglow Orange added...
40June 16, 2016white added, most of the tape added, and then aluminium...
41June 16, 2016more tape, some last sanding... on to alcad... I hope it will work out fine...
42June 16, 2016After painting
43June 16, 2016After painting
44June 16, 2016Partly unmasked
45June 16, 2016Partly unmasked
46June 22, 2016busy decalling, with a special thx to Dirk for providing these
47June 22, 2016busy decalling, with a special thx to Dirk for providing these
48June 22, 2016busy decalling, with a special thx to Dirk for providing these
49June 25, 2016
50June 25, 2016
51June 25, 2016
52June 25, 2016
53June 25, 2016
54June 25, 2016
55June 30, 2016
56June 30, 2016
57June 30, 2016
58June 30, 2016
59June 30, 2016
60June 30, 2016
61June 30, 2016
62June 30, 2016
Komentáře
15 May 2025, 16:34 -
Album info
My Construction of the Kinetic Fouga Magister. I want to build 1 in Belgian colours, but I don't know whether it will be the showbird or a bare metal one, and one in IDF markings.
